aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/arch/arm64/boot/dts/qcom/qcm6490-idp.dts (follow)
AgeCommit message (Collapse)AuthorFilesLines
2024-04-21arm64: dts: qcom: qcm6490-idp: Enable various remoteprocsKomal Bajaj1-0/+20
Enable the ADSP, CDSP, MPSS and WPSS that are found on the SoC. Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com> Link: https://lore.kernel.org/r/20240417120928.32344-2-quic_kbajaj@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-20arm64: dts: qcom: qcm6490-idp: Name the regulatorsUmang Chheda1-0/+41
Without explicitly specifying names for the regulators they are named based on the DeviceTree node name. This results in multiple regulators with the same name, making it impossible to reason debug prints and regulator_summary. Signed-off-by: Umang Chheda <quic_uchheda@quicinc.com> Link: https://lore.kernel.org/r/20240412123237.2633000-1-quic_uchheda@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-03-17arm64: dts: qcom: qcm6490-idp: enable PMIC Volume and Power buttonsHui Liu1-0/+36
The Volume Down & Power buttons are controlled by the PMIC via the PON hardware, and the Volume Up is connected to a PMIC gpio. Enable the necessary hardware and setup the GPIO state for the Volume Up gpio key. Signed-off-by: Hui Liu <quic_huliu@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240311-gpio-keys-v5-1-08823582f6c9@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-03-17arm64: dts: qcom: qcm6490-idp: add display and panelRitesh Kumar1-0/+92
Enable Display Subsystem with Novatek NT36672E Panel on qcm6490 idp platform. Signed-off-by: Ritesh Kumar <quic_riteshk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240215103929.19357-3-quic_riteshk@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-18arm64: dts: qcom: replace underscores in node namesKrzysztof Kozlowski1-1/+1
Underscores should not be used in node names (dtc with W=2 warns about them), so replace them with hyphens. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20240213145124.342514-1-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-09arm64: dts: qcom: qcm6490-idp: Correct the voltage setting for vph_pwrKomal Bajaj1-2/+2
Min and max voltages for vph_pwr should be same, otherwise rpmh will not probe, so correcting the min and max voltages for vph_pwr. Fixes: 9af6a9f32ad0 ("arm64: dts: qcom: Add base qcm6490 idp board dts") Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231220110015.25378-2-quic_kbajaj@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-02arm64: dts: qcom: qcm6490-idp: Include PM7250BUmang Chheda1-0/+5
Include PM7250B PMIC for qcm6490-idp. Signed-off-by: Umang Chheda <quic_uchheda@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240125115300.3496783-1-quic_uchheda@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-02arm64: dts: qcom: qcm6490-idp: Add definition for three LEDsHui Liu1-0/+28
Add definition for three LEDs to make sure they can be enabled base on QCOM LPG LED driver. Signed-off-by: Hui Liu <quic_huliu@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240126-lpg-v6-1-f879cecbce69@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-17arm64: dts: qcom: sc7280*: move MPSS and WPSS memory to dtsiLuca Weiss1-0/+1
It appears that all SC7280-based devices so far have mpss_mem and wpss_mem on the same reg with the same size. Also these memory regions are referenced already in sc7280.dtsi so that's where they should also be defined. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Link: https://lore.kernel.org/r/20231208-sc7280-remoteprocs-v3-4-6aa394d33edf@fairphone.com [bjorn: delete-node &wpss_mem in qcs6490 rb3gen2, and qcm6490 idp] Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-08arm64: dts: qcom: sc7280: Add CDSP nodeLuca Weiss1-0/+1
Add the node for the ADSP found on the SC7280 SoC, using standard Qualcomm firmware. Remove the reserved-memory node from sc7280-chrome-common since CDSP is currently not used there. Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Link: https://lore.kernel.org/r/20231208-sc7280-remoteprocs-v3-9-6aa394d33edf@fairphone.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-08arm64: dts: qcom: sc7280: Add ADSP nodeLuca Weiss1-0/+1
Add the node for the ADSP found on the SC7280 SoC, using standard Qualcomm firmware. Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Link: https://lore.kernel.org/r/20231208-sc7280-remoteprocs-v3-8-6aa394d33edf@fairphone.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-02arm64: dts: qcom: Add base qcm6490 idp board dtsKomal Bajaj1-0/+465
Add DTS for Qualcomm IDP platform using QCM6490 SoC. This adds debug uart, eMMC and usb support along with regulators found on this board. Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> Link: https://lore.kernel.org/r/20231129065816.26409-3-quic_kbajaj@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.