aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-06-13arm64: dts: allwinner: Use constants for RTC clock indexesSamuel Holland1-4/+6
The binding header provides descriptive names for the RTC clock indexes, since the indexes were arbitrarily chosen by the binding, not by the hardware. Let's use the names, so the meaning is clearer. Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220607012438.18183-2-samuel@sholland.org
2021-11-23arm64: dts: allwinner: a64: Update MBUS nodeSamuel Holland1-2/+8
In order to support memory dynamic frequency scaling (MDFS), the MBUS binding now requires enumerating more resources. Provide them in the device tree. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211118031841.42315-6-samuel@sholland.org
2021-11-22arm64: dts: allwinner: a64: Add CEC clock to HDMIJernej Skrabec1-2/+2
Experimentation determined that HDMI CEC controller inside DW HDMI block depends on 32k clock from RTC. If this clock is tampered with, HDMI CEC communication starts or stops working, depending on situation. SoC user manual doesn't say anything about CEC, so this was overlooked. Fix this by adding dependency to RTC 32k clock. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211120073448.32480-2-jernej.skrabec@gmail.com
2021-09-13arm64: dts: allwinner: a64: Add GPU opp tableJernej Skrabec1-0/+17
GPU on A64 currently runs at default frequency, which is 297 MHz. This is a bit low in some cases and noticeable lag can be observed in GPU rendered UIs. GPU is capable to run at 432 MHz. Add GPU OPP table. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210912095032.2397824-1-jernej.skrabec@gmail.com
2021-05-11arm64: dts: allwinner: a64: Allow multiple DAI linksSamuel Holland1-9/+14
simple-audio-card supports either a single DAI link at the top level, or subnodes with one or more DAI links. To use the secondary AIFs on the codec, we need to add additional DAI links to the same sound card, so we need to use the other binding. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210430035859.3487-6-samuel@sholland.org
2021-05-11arm64: dts: allwinner: a64: Add pinmux nodes for AIF2/AIF3Samuel Holland1-0/+12
Now that the sun8i-codec driver supports AIF2 and AIF3, boards can use them in DAI links. Add the necessary pinmux nodes. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210430035859.3487-5-samuel@sholland.org
2021-05-11arm64: dts: allwinner: a64: Allow using multiple codec DAIsSamuel Holland1-2/+2
Increase #sound-dai-cells on the digital codec to allow using the other DAIs provided by the codec for AIF2 and AIF3. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210430035859.3487-4-samuel@sholland.org
2021-05-11arm64: dts: allwinner: Add sun4i MMIO timer nodesSamuel Holland1-0/+9
For a CPU to enter an idle state, some timer must be available to trigger an IRQ and wake it back up. The local ARM architectural timer is not sufficient, because that timer stops when the CPU is powered down. The ARM architectural timer from some other CPU can be used, but doing so prevents that other CPU from entering an idle state. For all CPUs to power down at the same time, Linux needs a timer which is not tied to any CPU. Hook up the "sun4i" timer so it can be used for this purpose. It runs at 24 MHz, which balances resolution and power consumption. Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210322044707.19479-5-samuel@sholland.org
2021-05-11arm64: dts: allwinner: a64: Sort watchdog nodeSamuel Holland1-8/+8
Nodes should be sorted by unit address. Move the watchdog node to the correct place, so it will be next to the timer node when that is added. Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210322044707.19479-4-samuel@sholland.org
2021-03-06arm64: dts: allwinner: Move wakeup-capable IRQs to r_intcSamuel Holland1-0/+4
All IRQs that can be used to wake up the system must be routed through r_intc, so they are visible to firmware while the system is suspended. In addition to the external NMI input, which is already routed through r_intc, these include PIO and R_PIO (gpio-keys), the LRADC, and the RTC. Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2021-03-06arm64: dts: allwinner: Use the new r_intc bindingSamuel Holland1-1/+1
The binding of R_INTC was updated to allow specifying interrupts other than the external NMI, since routing those interrupts through the R_INTC driver allows using them for wakeup. Update the device trees to use the new binding. Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2021-01-14arm64: dts: allwinner: A64: Limit MMC2 bus frequency to 150 MHzAndre Przywara1-1/+1
In contrast to the H6 (and later) manuals, the A64 datasheet does not specify any limitations in the maximum possible frequency for eMMC controllers. However experimentation has found that a 150 MHz limit similar to other SoCs and also the MMC0 and MMC1 controllers on the A64 seems to exist for the MMC2 controller. Limit the frequency for the MMC2 controller to 150 MHz in the SoC .dtsi. The Pinebook seems to be the an odd exception, since it apparently seems to work with 200 MHz as well, so overwrite this in its board .dts file. Tested on a Pine64-LTS: 200 MHz HS-200 fails, 150 MHz HS-200 works. Fixes: 22be992faea7 ("arm64: allwinner: a64: Increase the MMC max frequency") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210113152630.28810-7-andre.przywara@arm.com
2021-01-14arm64: dts: allwinner: A64: properly connect USB PHY to port 0Andre Przywara1-0/+4
In recent Allwinner SoCs the first USB host controller (HCI0) shares the first PHY with the MUSB controller. Probably to make this sharing work, we were avoiding to declare this in the DT. This has two shortcomings: - U-Boot (which uses the same .dts) cannot use this port in host mode without a PHY linked, so we were loosing one USB port there. - It requires the MUSB driver to be enabled and loaded, although we don't actually use it. To avoid those issues, let's add this PHY link to the A64 .dtsi file. After all PHY port 0 *is* connected to HCI0, so we should describe it as this. Remove the part from the Pinebook DTS which already had this property. This makes it work in U-Boot, also improves compatiblity when no MUSB driver is loaded (for instance in distribution installers). Fixes: dc03a047df1d ("arm64: allwinner: a64: add EHCI0/OHCI0 nodes to A64 DTSI") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210113152630.28810-2-andre.przywara@arm.com
2020-11-02arm64: dts: allwinner: a64: Add I2S2 nodeMarcus Cooper1-0/+14
Add the I2S2 node connected to the HDMI interface. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Marcus Cooper <codekipper@gmail.com> Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20201030144648.397824-13-peron.clem@gmail.com
2020-09-17arm64: dts: allwinner: a64: Update the audio codec compatibleSamuel Holland1-1/+2
The audio codec in the A64 has some differences from the A33 codec, so it needs its own compatible. Since the two codecs are similar, the A33 codec compatible is kept as a fallback. Using the correct compatible fixes a channel inversion issue and cleans up some DAPM widgets that are no longer used. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20200726012557.38282-8-samuel@sholland.org
2020-09-17arm64: dts: allwinner: a64: Update codec widget namesSamuel Holland1-4/+4
The sun8i-codec driver introduced a new set of DAPM widgets that more accurately describe the hardware topology. Update the various device trees to use the new widget names. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20200726012557.38282-7-samuel@sholland.org
2020-08-18arm64: dts: allwinner: Mark timer as stopped in suspendSamuel Holland1-0/+1
When possible, system firmware on 64-bit Allwinner platforms disables OSC24M during system suspend. Since this oscillator is the clock source for the ARM architectural timer, this causes the timer to stop counting. Therefore, the ARM architectural timer must not be marked as NONSTOP on these platforms, or the time will be wrong after system resume. Adding the arm,no-tick-in-suspend property forces the kernel to ignore the ARM architectural timer when calculating sleeptime; it falls back to reading the RTC. Note that this only affects deep suspend, not s2idle. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20200809021822.5285-1-samuel@sholland.org
2020-08-18arm64: dts: allwinner: replace numerical constant with CCU_CLKXAlexander Kochetkov1-4/+4
Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20200803143022.25909-1-al.kochet@gmail.com
2020-06-04Merge tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-0/+12
Pull ARM devicetree updates from Arnd Bergmann: "This is the set of device tree changes, mostly covering new hardware support, with 577 patches touching a little over 500 files. There are five new Arm SoCs supported in this release, all of them for existing SoC families: - Realtek RTD1195, RTD1395 and RTD1619 -- three SoCs used in both NAS devices and Android Set-top-box designs, along with the "Horseradish", "Lion Skin" and "Mjolnir" reference platforms; the Mele X1000 and Xnano X5 set-top-boxes and the Banana Pi BPi-M4 single-board computer. - Renesas RZ/G1H (r8a7742) -- a high-end 32-bit industrial SoC and the iW-RainboW-G21D-Qseven-RZG1H board/SoM - Rockchips RK3326 -- low-end 64-bit SoC along with the Odroid-GO Advance game console Newly added machines on already supported SoCs are: - AMLogic S905D based Smartlabs SML-5442TW TV box - AMLogic S905X3 based ODROID-C4 SBC - AMLogic S922XH based Beelink GT-King Pro TV box - Allwinner A20 based Olimex A20-OLinuXino-LIME-eMMC SBC - Aspeed ast2500 based BMCs in Facebook x86 "Yosemite V2" and YADRO OpenPower P9 "Nicole" - Marvell Kirkwood based Check Point L-50 router - Mediatek MT8173 based Elm/Hana Chromebook laptops - Microchip SAMA5D2 "Industrial Connectivity Platform" reference board - NXP i.MX8m based Beacon i.MX8m-Mini SoM development kit - Octavo OSDMP15x based Linux Automation MC-1 development board - Qualcomm SDM630 based Xiaomi Redmi Note 7 phone - Realtek RTD1295 based Xnano X5 TV Box - STMicroelectronics STM32MP1 based Stinger96 single-board computer and IoT Box - Samsung Exynos4210 based based Samsung Galaxy S2 phone - Socionext Uniphier based Akebi96 SBC - TI Keystone based K2G Evaluation board - TI am5729 based Beaglebone-AI development board Include device descriptions for additional hardware support in existing SoCs and machines based on all major SoC platforms: - AMlogic Meson - Allwinner sunxi - Arm Juno/VFP/Vexpress/Integrator - Broadcom bcm283x/bcm2711 - Hisilicon hi6220 - Marvell EBU - Mediatek MT27xx, MT76xx, MT81xx and MT67xx - Microchip SAMA5D2 - NXP i.MX6/i.MX7/i.MX8 and Layerscape - Nvidia Tegra - Qualcomm Snapdragon - Renesas r8a77961, r8a7791 - Rockchips RK32xx/RK33xx - ST-Ericsson ux500 - STMicroelectronics SMT32 - Samsung Exynos and S5PV210 - Socionext Uniphier - TI OMAP5/DRA7 and Keystone" * tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (564 commits) ARM: dts: keystone: Rename "msmram" node to "sram" arm: dts: mt2712: add uart APDMA to device tree arm64: dts: mt8183: add mmc node arm64: dts: mt2712: add ethernet device node arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1 ARM: dts: mmp3: Add the fifth SD HCI ARM: dts: berlin*: Fix up the SDHCI node names ARM: dts: mmp3: Fix USB & USB PHY node names ARM: dts: mmp3: Fix L2 cache controller node name ARM: dts: mmp*: Fix up encoding of the /rtc interrupts property ARM: dts: pxa*: Fix up encoding of the /rtc interrupts property ARM: dts: pxa910: Fix the gpio interrupt cell number ARM: dts: pxa3xx: Fix up encoding of the /gpio interrupts property ARM: dts: pxa168: Fix the gpio interrupt cell number ARM: dts: pxa168: Add missing address/size cells to i2c nodes ARM: dts: dove: Fix interrupt controller node name ARM: dts: kirkwood: Fix interrupt controller node name arm64: dts: Add SC9863A emmc and sd card nodes arm64: dts: Add SC9863A clock nodes arm64: dts: mt6358: add PMIC MT6358 related nodes ...
2020-05-04arm64: dts: allwinner: sun50i-a64: Add missing address/size-cellsOndrej Jirman1-0/+2
The binding specifies #address-cells and #size-cells should be present. Without them present, dtc issues a warning because default for #address-cells seems to be <2>: arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi:1108.4-52: Warning (dma_ranges_format): /soc/dram-controller@1c62000:dma-ranges: "dma-ranges" property has invalid length (12 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 1) mbus #address-cells should be 1. Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-05-04arm64: dts: allwinner: a64: Remove unused SPDIF sound cardSamuel Holland1-18/+0
As of v5.7-rc2, Linux now prints the following message at boot: [ 33.848525] platform sound_spdif: deferred probe pending This is because sound_spdif is waiting on its CPU DAI &spdif to probe, but &spdif is disabled in the device tree. Exposure of the SPDIF pin is board-specific functionality, so the sound card and codec DAI belong in the individual board DTS, not the SoC DTSI. In fact, no in-tree A64 board DTS enables &spdif, so let's remove the card and DAI entirely. This reverts commit 78e071370a86473f25923e03b51cbbadacf8be0f. Acked-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-04-14arm64: dts: allwinner: a64: Add msgbox nodeSamuel Holland1-0/+10
The A64 SoC contains a message box that can be used to send messages and interrupts back and forth between the ARM application CPUs and the ARISC coprocessor. Add a device tree node for it. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-03-12arm64: dts: allwinner: a64: add node for rotation coreJernej Skrabec1-0/+12
Allwinner A64 contains rotation core compatible to A83T. Add a node for it. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2020-03-12arm64: dts: allwinner: a64: Fix display clock register rangeJernej Skrabec1-1/+1
Register range of display clocks is 0x10000, as it can be seen from DE2 documentation. Fix it. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Fixes: 2c796fc8f5dbd ("arm64: dts: allwinner: a64: add necessary device tree nodes for DE2 CCU") [wens@csie.org: added fixes tag] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2020-02-27arm64: dts: sun50i-a64: Add i2c2 pinsOndrej Jirman1-1/+7
PinePhone needs I2C2 pins description. Add it, and make it default for i2c2, since it's the only possiblilty. Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-02-11arm64: dts: allwinner: a64: Add deinterlace core nodeJernej Skrabec1-0/+14
A64 contains deinterlace core, compatible to the one found in H3. It can be used in combination with VPU unit to decode and process interlaced videos. Add a node for it. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-02-11arm64: dts: allwinner: a64: Add MBUS controller nodeJernej Skrabec1-0/+8
A64 contains MBUS, which is the bus used by DMA devices to access system memory. MBUS controller is responsible for arbitration between channels based on set priority and can do some other things as well, like report bandwidth used. It also maps RAM region to different address than CPU. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-01-13arm64: dts: allwinner: a64: add cooling maps and thermal tripping pointsVasily Khoruzhick1-0/+44
Add cooling maps and thermal tripping points to prevent CPU overheating when running at the highest frequency. Tripping points are taken from A33 dts since A64 user manual doesn't mention when we should start throttling. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-01-13arm64: dts: allwinner: a64: add CPU clock to CPU0-3 nodesVasily Khoruzhick1-0/+8
Add CPU clock to the CPU nodes since it is a prerequisite for enabling DVFS. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> [wens@csie.org: Replace CLK_CPUX macro with raw number] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2020-01-06arm64: dts: allwinner: sun50i-a64: Use macros for newly exported clocksChen-Yu Tsai1-3/+4
A few clocks from the CCU were exported later, and references to them in the device tree were using raw numbers. Now that the DT binding header changes are in as well, switch to the macros for more clarity. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-26arm64: dts: allwinner: a64: Add MIPI DSI pipelineJagan Teki1-0/+37
Add MIPI DSI pipeline for Allwinner A64. - dsi node, with A64 compatible since it doesn't support DSI_SCLK gating unlike A33 - dphy node, with A64 compatible with A33 fallback since DPHY on A64 and A33 is similar - finally, attach the dsi_in to tcon0 for complete MIPI DSI Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Merlijn Wajer <merlijn@wizzup.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-26arm64: dts: allwinner: a64: Add thermal sensors and thermal zonesVasily Khoruzhick1-0/+42
A64 has 3 thermal sensors: 1 for CPU, 2 for GPU. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-16arm64: dts: allwinner: unify header comment styleClément Péron1-5/+3
Allwinner device tree files used different comment style for copyright notice. Update this to keep a coherency. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-16arm64: dts: allwinner: Convert license to SPDX identifierClément Péron1-38/+1
Use a shorter SPDX identifier instead of pasting the whole license. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-16arm64: dts: allwinner: Fix wrong license headerClément Péron1-1/+1
Some headers specify that files are under dual-licensed GPL2.0+ and X11. But in fact, it turns out that the full licenses texts associated are GPL2.0+ and MIT. Fix license headers to reflect real licenses associated. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-05Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-0/+18
Pull ARM Device-tree updates from Olof Johansson: "As always, the bulk of updates. Some of the news this cycle: New SoC descriptions: - Broadcom BCM2711 - Amlogic Meson A1 and G12 - Freescale S32V234 - Marvell Armada AP807/AP807-quad and CP115 - Realtek RTD1293 and RTD1296 - Rockchip RK3308 New boards and platforms: - Allwinner: NanoPi Duo2 - Amlogic: Ugoos am6 - Atmel at91: Overkiz Kizbox2/4 - Broadcom: RPi4, Luxul XWC-2000 - Marvell: New Espressobin flavor - NXP: i.MX8MN LPDDR4 EVK, i.MX8QXP Colibri, S32V234 EVB, Netronix E60K02 and Kobo Clara HD, Kontron N6311 and N6411, OPOS6UL and OPOS6ULDev - Renesas: Salvator-XS - Rockchip: Beelink A1 (rk3308), rk3308 eval boards, rk3399-roc-pc" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (653 commits) ARM: dts: logicpd-torpedo: Disable USB Host arm: dts: mt6323: add keys, power-controller, rtc and codec arm64: dts: mt8183: add systimer0 device node dt-bindings: mediatek: update bindings for MT8183 systimer arm64: dts: rockchip: fix sdmmc detection on boot on rk3328-roc-cc arm64: dts: rockchip: Split rk3399-roc-pc for with and without mezzanine board. arm64: dts: rockchip: Add Beelink A1 dt-bindings: ARM: rockchip: Add Beelink A1 arm64: dts: rockchip: Add RK3328 audio pipelines arm64: dts: ti: k3-j721e-common-proc-board: Add USB ports arm64: dts: ti: k3-j721e-main: add USB controller nodes ARM: dts: aspeed-g6: Add timer description ARM: dts: aspeed: ast2600evb: Enable i2c buses ARM: dts: at91: add a dts and dtsi file for kizbox2 based boards dt-bindings: arm: at91: Document Kizbox2-2 board binding arm64: dts: meson-gx: fix i2c compatible arm64: dts: meson-gx: cec node should be disabled by default arm64: dts: meson-g12b-odroid-n2: add missing amlogic, s922x compatible arm64: dts: meson-gxm: fix gpu irq order arm64: dts: meson-g12a: fix gpu irq order ...
2019-11-06Merge tag 'sunxi-fixes-for-5.4-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dtOlof Johansson1-4/+4
One patch to add back the PMU node that was removed because the interrupts were improper in a previous fixes PR. * tag 'sunxi-fixes-for-5.4-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: a64: Re-add PMU node ARM: sunxi: Fix CPU powerdown on A83T ARM: dts: sun8i-a83t-tbs-a711: Fix WiFi resume from suspend ARM: dts: sun7i: Drop the module clock from the device tree dt-bindings: media: sun4i-csi: Drop the module clock media: dt-bindings: Fix building error for dt_binding_check arm64: dts: allwinner: a64: sopine-baseboard: Add PHY regulator delay arm64: dts: allwinner: a64: Drop PMU node arm64: dts: allwinner: a64: pine64-plus: Add PHY regulator delay Link: https://lore.kernel.org/r/45023fa6-b2bc-4934-b85c-3e7841dde0b1.lettre@localhost Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-06arm64: dts: allwinner: a64: Re-add PMU nodeAndre Przywara1-0/+9
As it was found recently, the Performance Monitoring Unit (PMU) on the Allwinner A64 SoC was not generating (the right) interrupts. With the SPI numbers from the manual the kernel did not receive any overflow interrupts, so perf was not happy at all. It turns out that the numbers were just off by 4, so the PMU interrupts are from 148 to 151, not from 152 to 155 as the manual describes. This was found by playing around with U-Boot, which typically does not use interrupts, so the GIC is fully available for experimentation: With *every* PPI and SPI enabled, an overflowing PMU cycle counter was found to set a bit in one of the GICD_ISPENDR registers, with careful counting this was determined to be number 148. Tested with perf record and perf top on a Pine64-LTS. Also tested with tasksetting to every core to confirm the assignment between IRQs and cores. This somewhat "revert-fixes" commit ed3e9406bcbc ("arm64: dts: allwinner: a64: Drop PMU node"). Fixes: 34a97fcc71c2 ("arm64: dts: allwinner: a64: Add PMU node") Fixes: ed3e9406bcbc ("arm64: dts: allwinner: a64: Drop PMU node") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-11-01arm64: dts: allwinner: sun50i: Add Crypto Engine node on A64Corentin Labbe1-0/+9
The Crypto Engine is a hardware cryptographic accelerator that supports many algorithms. It could be found on most Allwinner SoCs. This patch enables the Crypto Engine on the Allwinner A64 SoC Device-tree. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-10-25Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-9/+0
Pull ARM SoC fixes from Olof Johansson: "A slightly larger set of fixes have accrued in the last two weeks. Mostly a collection of the usual smaller fixes: - Marvell Armada: USB phy setup issues on Turris Mox - Broadcom: GPIO/pinmux DT mapping corrections for Stingray, MMC bus width fix for RPi Zero W, GPIO LED removal for RPI CM3. Also some maintainer updates. - OMAP: Fixlets for display config, interrupt settings for wifi, some clock/PM pieces. Also IOMMU regression fix and a ti-sysc no-watchdog regression fix. - i.MX: A few fixes around PM/settings, some devicetree fixlets and catching up with config option changes in DRM - Rockchip: RockRro64 misc DT fixups, Hugsun X99 USB-C, Kevin display panel settings ... and some smaller fixes for Davinci (backlight, McBSP DMA), Allwinner (phy regulators, PMU removal on A64, etc)" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits) ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157 MAINTAINERS: Update the Spreadtrum SoC maintainer MAINTAINERS: Remove Gregory and Brian for ARCH_BRCMSTB ARM: dts: bcm2837-rpi-cm3: Avoid leds-gpio probing issue bus: ti-sysc: Fix watchdog quirk handling ARM: OMAP2+: Add pdata for OMAP3 ISP IOMMU ARM: OMAP2+: Plug in device_enable/idle ops for IOMMUs ARM: davinci_all_defconfig: enable GPIO backlight ARM: davinci: dm365: Fix McBSP dma_slave_map entry ARM: dts: bcm2835-rpi-zero-w: Fix bus-width of sdhci ARM: imx_v6_v7_defconfig: Enable CONFIG_DRM_MSM arm64: dts: imx8mn: Use correct clock for usdhc's ipg clk arm64: dts: imx8mm: Use correct clock for usdhc's ipg clk arm64: dts: imx8mq: Use correct clock for usdhc's ipg clk ARM: dts: imx7s: Correct GPT's ipg clock source ARM: dts: vf610-zii-scu4-aib: Specify 'i2c-mux-idle-disconnect' ARM: dts: imx6q-logicpd: Re-Enable SNVS power key arm64: dts: lx2160a: Correct CPU core idle state name mailmap: Add Simon Arlott (replacement for expired email address) arm64: dts: rockchip: Fix override mode for rk3399-kevin panel ...
2019-10-04ARM: dts: sunxi: Revert phy-names removal for ECHI and OHCIMaxime Ripard1-0/+2
This reverts commits 3d109bdca981 ("ARM: dts: sunxi: Remove useless phy-names from EHCI and OHCI"), 0a3df8bb6dad ("ARM: dts: sunxi: h3/h5: Remove useless phy-names from EHCI and OHCI") and 3c7ab90aaa28 ("arm64: dts: allwinner: Remove useless phy-names from EHCI and OHCI"). It turns out that while the USB bindings were not mentionning it, the PHY client bindings were mandating that phy-names is set when phys is. Let's add it back. Fixes: 3d109bdca981 ("ARM: dts: sunxi: Remove useless phy-names from EHCI and OHCI") Fixes: 0a3df8bb6dad ("ARM: dts: sunxi: h3/h5: Remove useless phy-names from EHCI and OHCI") Fixes: 3c7ab90aaa28 ("arm64: dts: allwinner: Remove useless phy-names from EHCI and OHCI") Reported-by: Emmanuel Vadot <manu@bidouilliste.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20191002112651.100504-1-mripard@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-30arm64: dts: allwinner: a64: Drop PMU nodeVasily Khoruzhick1-9/+0
Looks like PMU in A64 is broken, it generates no interrupts at all and as result 'perf top' shows no events. Tested on Pine64-LTS. Fixes: 34a97fcc71c2 ("arm64: dts: allwinner: a64: Add PMU node") Cc: Harald Geyer <harald@ccbib.org> Cc: Jared D. McNeill <jmcneill@NetBSD.org> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Emmanuel Vadot <manu@FreeBSD.org> Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-08-23ARM: dts: sunxi: Add missing watchdog clocksMaxime Ripard1-0/+1
The watchdog has a clock on all our SoCs, but it wasn't always listed. Add it to the devicetree where it's missing. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-24arm64: dts: allwinner: a64: Add IR nodeIgors Makejevs1-0/+18
IR peripheral is completely compatible with A31 one. Signed-off-by: Igors Makejevs <git_bb@bwzone.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Clément Péron <peron.clem@gmail.com> Acked-by: Sean Young <sean@mess.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-23ARM: dts: sunxi: Fix the HDMI PHY nameMaxime Ripard1-1/+1
Even though the binding mentions that the PHY name must be "phy", it turns out that all our DTs had "hdmi-phy" instead. The code doesn't care about the phy-names property, so we can just change our DTs to match the binding, without any side effect. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-22ARM: dts: sunxi: Unify the DE2 bus clocks orderMaxime Ripard1-4/+4
The DE2 bus takes two clocks, named bus and mod according to the binding. However, the order of these clocks change from one SoC to another. Even though it might not be an issue in most cases, having consistency will help if we ever need to have some code to deal with deprecated bindings, and in general it's just better. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-06-05arm64: dts: allwinner: a64: Add lradc nodeLuca Weiss1-0/+8
Add a node describing the KEYADC on the A64. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-05-20arm64: dts: allwinner: a64: Add pinmux for RGB666 LCDIcenowy Zheng1-0/+10
Allwinner A64's TCON0 can output RGB666 LCD signal. Add its pinmux. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Torsten Duwe <duwe@suse.de> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-05-20arm64: dts: allwinner: a64: move I2C pinctrl to dtsiJagan Teki1-0/+4
There is only one pinmuxing available for each I2C controller. So, move pinctrl for i2c0, i2c1 from board dts files into SoC dtsi. By moving these pinctrls the i2c1 node from Nanopi A64 just have a status, which is disabled already so remove the entire node from it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-18arm64: dts: allwinner: a64: Add pinmux setting for CSI MCLK on PE1Jagan Teki1-0/+6
Some camera modules have the SoC feeding a master clock to the sensor instead of having a standalone crystal. This clock signal is generated from the clock control unit and output from the CSI MCLK function of pin PE1. Add a pinmux setting for it for camera sensors to reference. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.